Asus Prime Z370-A II Transitioning from Clover to Open Core v 0.6.6 - "No mapping exists for frame pointer"
By - Zoratt
I have an Asus Prime Z370-P II that I've successfully hacked with open core. Here's my most recent config.plist [OC 0.6.6](https://www.joshkinsey.com/files/opencore_config_0.6.6.plist) . You won't be able to drop it straight in and go since I removed the stuff PlatformInfo stuff specific to my system from it. Also, it's referring to some kexts that won't work with your system, but maybe it'll point you in the right direction. I don't think you need the SSDT-AWAC for our particular board.
This is what did it thanks Josh!
Settings that differ from the guide for this motherboard in Config.plist - Booter - Quirks
* DevirtualiseMMio - True
* ProtectUefiServices - False
* RebuildAppleMemoryMap - False
* SetupVirtualMap - False
Thanks Josh. I will check that out and see what I can find. I will review the AWAC.aml
I looked in your config.plist where did you find the CFG Lock in the Asus Bios. you have AppleXcpmCfgLock set to disabled.
I wanted to post this for others that have the Asus Prime Z370-P and confirm with you on Bios Settings:
* Fast Boot – Boot Fast Boot
* Secure Boot – Boot\\Secure Boot
* Serial/COM Port – Advanced\\Onboard Devices\\Configuration
* Parallel Port (none)
* VT-d (can be enabled if you set DisableIoMapper to YES) – Advanced\\System Agent (SA) Configuration
* CSM – Boot\\CSM (Compatibility Support Module)
* Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly) – Advanced\\Thunderbolt™ Configuration
* Intel SGX – advanced\\cpu configuration
* Intel Platform Trust – advanced\\PCH-FW Configuration – TPM - Discrete
* CFG Lock (MSR 0xE2 write protection)(**This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled**) – Can’t find so did the Kernel -> Quirks
* VT-x - Advanced\\CPU Configuration – Intel Virtualization Technology
* Above 4G decoding - Advanced\\System Agent (SA) Configuration
* Hyper-Threading – not supported on 9700k chipset
* Execute Disable Bit - can’t find it
* EHCI/XHCI Hand-off – option not showing under Advanced\\USB Configuration
* OS type: Windows 8.1/10 UEFI Mode – Boot\\Secure Boot
* DVMT Pre-Allocated(iGPU Memory): 64MB – Advanced\\System Agent (SA) Configuration\\Graphics Configuration
* SATA Mode: AHCI – Advanced\\PCH Storage Configuration
In my bios, its under Advanced>CPU Configuration>CPU - Power Management Control
Thanks. I had found it before but couldn't find it again. It is like a game of Where is Waldo.
Josh, are you running a Video Card, or the stock integrated Intel one?
Radeon RX 570. I'm using the intel headless for quick sync support.
Thanks. The changes you made under booter made all the difference. Making my way through install and fingers are crossed.
Using Sanity Checker: [https://opencore.slowgeek.com/?file=coffeelake066HZaek3&rs=coffeelake066](https://opencore.slowgeek.com/?file=coffeelake066HZaek3&rs=coffeelake066)
I updated **DisableIoMapper** to True even though I have that set in the BIOS.
Have you got this to fixed?
Yes I did. Thought I had changed the flair to Solved.
What did you do to fix this? Is it the one where you change the parts on the booter segment to this values?
Yes. That is what allowed me to get past the issue. Since being up and running I have done an update with no issue.
Thanks! Will try this out
Great. Which motherboard are you using?
Im using Asus Z370 Prime P. Should be pretty similar to yours i assume...
Yeah. There was someone else that used another Asus Z370 board and this fixed their issue too, why I was asking. If it works, share back so others know.